Tension Control System

The STC-858A models of web tension controllers automatically control unwinding, intermediate, or winding tension by receiving signals from either the LS-TD or LC model of tension detector. These controllers generate a control voltage of 0 to 24V to the powder clutch/brake or hysteresis clutch/brake, or generate a torque command voltage of 0 to 5 V to the AC servo amplifier.

Auto Web Tension control system with LS tension detector

STC-002 Manual Web Tension controller

STC-002 manual tension controller is simple and convenient to applicate, compact, and easy to install. Output stability, using high-quality components and product quality. STC-002 manual tension controller can facilitate the achievement of tension control for the Thin-film printing process and winder which need to control the tension.

LC Flange type tension detector

This flange type tension detector is electrically compatible with a stationary tension detector (LS-TD). It can be attached directly to the wall of equipment, minimizing the width of the equipment. This tension detector, with a smaller footprint than a stationary tension detector, can be used for more complicated material path line devices and for tension control with a high degree of freedom.

LB series sensor roller | load cell| tension detector for tension control system

The sensor roller of LB series is recommended for the web tension detecting during the web processing, in cantilever applications. The LB sensor roller has an high precision in detecting the web tension thanks to the two sensor with double metal foil right inside.

Taper Tension Controller