SUNRISE - Magnetic clutch manufacturers for over 20 years in web guide control system industry.

Magnetic Powder Clutch Mounting Steps

2011-08-18

Note: Do not use excessive force when mounting couplings, pulleys, or sprockets on shafts.

Note: For proper function, mount magnetic particle clutch horizontally.

For mounting dimensions, please refer to pages our description.

As A Magnetic Powder Clutch

Step 1: Bolt magnetic powder clutch into place

Mounting the powder clutch to a vertical surface, using customer supplied fasteners. See Figure 1.

Step 2: Make Mechanical Connections

Mount couplings, pulleys, or sprockets to the male shafts per the manufacturer's recommendations. The pulleys, sprockets, couplings, mounting brackets, and bolts are customer supplied. (The output shaft can be used as the input and the input hub as the output, but the output inertia will be higher.)

As A Magnetic Powder Brake

Step 1: Bolt magnetic powder clutch in place

Secure the mounting flange and the output shaft as shown in Figure 2. Take care to ensure that the alignment is real and there is no binding in the bearings.

Step 2: Mount Pulley, Sprocket, or Coupling

Bolt the pulley, sprocket, or coupling to the input hub of the unit. The pulleys, sprockets, couplings, mounting brackets and bolts are customer supplied.

Figure1* - Mounted as a magnetic particle clutch

Figure 2* - Mounted as a magnetic particle brake

Noted: Shaded items are customer supplied

Magnetic Particle Clutch Electrical Connections

Magnetic Powder Clutch Pre-Mounting Matters

recommended for you