Web Guiding System







Guided Ball Nut adds reliability and long-term performance






Brushless motor for reduced maintenance and greater thrust




Color touch screen with options for mounting vertically or horizontally


Multiple languages and icons for easy setup, training and operation


Cost-effective solution for narrow web and nonwoven applications


Compact design fits easily in tight spaces




Optional splice table and fine adjustment mounting bracket

Supply High Precision PG series Steering Frame with Web Guide Controller
















Steering Frame PG series Features:






1. Support three operation modes: edge-following, line-following and center-alignment.






2. Support photoelectric sensor, ultrasonic transducer and CCD Sensor






3. Detect sensor’s parameters intelligently, no need to correct the sensor under most circumstances






4. Automatic travel measurement, no need to limit the switch mechanically.






5. No overshot integral variable PI algorithm, high accuracy, fast reaction and less error.






6. 0.5mS super-speed of responding






7. Analog quantity transducer signal 12bit AD sampling, 700,000 times of sampling per second






8. Adopt FIR digital filter and return difference filter, stronger anti-interference capability and more stable signal






9. DC servo motor to push the ball screw






10. Power-down memory of all the parameters at any states in the system






11. Store 10 groups of parameters from different material, convenient and efficient switchover of material






12. Simplified Chinese/ Traditional Chinese /English for menu operation






13. Humanized operation, fast, simple and convenient






14. Support Modbus and PLC/Human-computer networking control






 






More advantages:






1. Brushless DC servo motor driving, maintenance free;


2. Accuracy ball screw bar and accuracy positioning;


3. With large guiding travel;


4. Roller length and width can be custom made;


5. Roller surface treatment can be anodized, rubber and cork leather.

Micro Manual Tension controller STC-001 for printing machine






The TC-001 Series is a compact manual tension controller that provides excitation current for magnetic powder clutches/brakes, hysteresis clutches/ brakes, and more.






It is very suitable for the situation with little current for each channel where a multi-channel tension control is required on a device such as a slitting machine, printing machine, or cable processing.






The manual tension controller is small in size and easy to install.






Installation dimensions
















Function: Tension Controller STC-001


Features:


1) Power supply: DC 26~28V/5A


2) Small size and thin


3) Max. output current can reach 4.00A, adjustable step-in 0.01A


4) No fan for heat dissipation


5) Can record the output current value without operation for 5 seconds


6) With forbid output/ allow output function


7) With short circuit protection


Price: $60/pc


MOQ: 1pc


Payment term: T/T, Western union


Delivery term: EXW


Validity: 10 days


Lead time: 3-7 days


Website: sunrisescn.com

Tension Controllers



Tension and Torque Controllers automatically compensate for changes in roll diameter, speed and other process variables.







What is Web Tension Control ?

Web tension control can be defined as the maintenance of a set amount of web tension (pull or force) for a material being processed. Often measured in oz, lbs, grams, kg, or newtons ¡ª proper tension must be maintained to prevent stretching, wrinkling, breaking or inconsistent registration of material during printing or converting processes.





Web tension control improves uniformity in coating applications and material lamination while decreasing the incidence of rewind defects such as crushed cores, starring and telescoping. When web tension is under control it can enable processes to run at higher speeds while reducing scrap, delivering a rapid return on investment that boosts producers' long term profitability.





Where is web tension control most commonly used?

Web tension control is most commonly used in three zones: Unwind (infeed), Intermediate (process), and Rewind (take up).

In the unwind zone, infeed roll hold-back torque is often controlled by an electric or pneumatic brake. The web strain or tension resulting from this torque is regulated by a closed-loop controller to prevent web drooping, stretching or wrap-up incidents ahead of transiting to the intermediate zone.

Proper maintenance of intermediate zone tension is often critical to ensuring the quality of coating, laminating, curing, treating or slitting processes. This zone is typically controlled by a set of driven nip rollers which dictate line speed to the entire system. This speed reference is matched in the unwind and rewind by virtue of having to accelerate or decelerate in order to maintain a desired tension set point.

Proper tension in the rewind zone ensures under or over-tight rolls and their associated defects are prevented. Rewind zone torque is often controlled by the motor drives of center or surface winders. Implementing progressive taper tension techniques during winding is an effective way to ensure finished rolls maintain spring tension stability and do not experience material shift and core deformation during handling and storage.

From process start to finish, it's clear that reliable web tension control is the key to ensuring maximum system efficiency and quality of finished products.











Typical tension control solutions incorporate:



Sunrise Automatic tension controller such as the LTC-858A,LTC-858A



Sunrise Tension sensor such as LS series or LC series tension sensor



Sunrise A Pneumatic Brake, Magnetic Particle Brake, Clutch

Web Guide Control system
















Sunrise Group web guide control system is

typically a mechanical structure that makes contact with the material and moves

the web material. Depending on the type of web guide, the shape and size of the

guide mechanism are varied. An actuator moves the web guide mechanism to guide

the web at the appropriate location.
















A web edge sensor or a web position sensor

detects the position of the web materials. This measurement is used to

determine and control the desired position of the materials.























The web guide controller is the brain of

the web guiding system. The controller uses the measurement from the sensor to determine

the necessary corrective action. The controller then command the actuator to

move the guide mechanism to actively control the web position.























Design of Web Guide Control System
















The design includes two rollers (or more)

on the web guide mechanism that rotate about an imaginary pivot point. Hence

they are also called an offset-pivot guide.













The two rollers guide platform enables pure

displacement of the web with minimal bending stresses on the web. This pure

displacement action enables web correction with minimal entry and exit span

requirements.























Sunrise will find the best web guide control system
















As we search for the most appropriate

equipment for our operation, we are faced with the task of selecting from

myriad options based on technical data and specs. Through these data,

measurements of accuracy, precision, linearity and resolution, we are trying to

present the benefits of their products based on the device’s performance profile.