Pneumatic Air Brake: Things You May Want to Know
pneumatic air brake revitalizes Sunrise Group (Dongguan) Industrial Co., Ltd. Here are some reasons that why it makes a great difference in the company. Firstly, it has a special appearance thanks to the industrious and knowledgeable designers. Its exquisite design and unique appearance have attracted many customers from the world. Secondly, it combines the wisdom of technicians and efforts of our staff. It is sophisticatedly processed and exquisitely made, thus making it be of extremely high performance. Lastly, it has a long service life and is of easy maintenance.
Our sales report shows that almost every Sunrise product is obtaining more repeat purchases. Most of our customers are greatly satisfied with the functionality, design and other attributes of our products and also pleased to the economic benefits they get from the product, such as sales growth, larger market share, the increase of brand awareness and so on. With the spread of word of mouth, our products are attracting more and more customers worldwide.
Customers benefit from our close relationships with leading suppliers across multiple product lines. These relationships, established over many years, help us respond to customers' needs for complex product requirements and delivery plans. We allow our customers to have easy access to us through the established SUNRISE platform. No matter what the complexity of a product requirement, we have the ability to handle it.
no data
3
Powder clutch and powder brake basic Design and operation
Sunrise’s powder clutch and powder brake units utilized electromagnetic powder to transmit torque. This offers the advantages of more streamlined and softer clutch operation and greater effectiveness during engagement of clutch friction surfaces.
Sunrise produces a diverse range for clutches and is widely experienced in their application.The company has accumulated extensive technology and know-how and can meet your any needs.All of the products available are used to control winding achiness used in producing paper, fiber, wire and cable and plastic items, and are indispensable parts of any production line.These units can also be used in low-impact start and drive applications and to prevent overload during operations as torque.
1. Easy, wide-range controls
The closed correlation between magnetic current and torque makes it easy to control transmitted torque over a very broad range.
2. Enables seamless, continuous operation
The use of magnetic powder makes it possible to maintain continuous operation with no effect on turning speeds, with stable torque levels over long periods.
3.Steady torque
The word surfaces and the curved shape contribute to proper operation of the magnetic powder, and a steady level of torque is available even when powder is repeatedly turned on and off.
4. No Chirping
The design avoids the development of slick spots on friction surfaces which can cause squeaks and chirping, resulting in ultra-quiet operation.
5.Extra heat capacity
This design avoids the development of slick spots on friction surfaces which can cause squeaks and chirping, resulting in ultra-quiet operation.
6. Smooth engagement and transmission
The static and dynamic friction rates for this model are virtually identical, which means very little vibration when contact is made. Acceleration and speed reduction to meet torque demands are also smoothly accomplished.
Powder clutch | powder brakeMotion characteristics
This section describes desired control of start-up times as well as the actions necessary when performing repeated high frequency operations.
Figure 3 depicts how the powder clutch functions during engagement and release. When voltage is delivered to the coil, the energizing current changes and exhibits numerical increases in accordance with the time factor (T=L/R). This time factor is determined by the basic resistance R of the coil and the induction index L. The increase in torque is only slightly slower than the rise in magnetic current and has nothing to do with the slip between the driver and driven sides; it will continue to rise until it reaches a set level. The torque also causes the load level to rise steadily.
In other words, although the drive and driven sides are not directly connected, the desired level of torque can still be achieved. This feature is connected to the large heat capacity of the clutch and offers several advantages where low-impact starts and stops or high-speed starts and stops are concerned. This feature is helpful when emergency connection and drive are needed. Low resistance can be added into the coil to reduce the time factor; and when toque start-up causes twice to three times the rated voltage is applied, the coil time factor T may rise to 4-5T, which will cause torque to build up fully. On the other hand, when the magnetism is cut off and torque is gone, about one T of time will be needed. Consult the various specification charts for time factors for coils.
¡ôAllowable sustained slip rates
Although powder clutches and brakes can be used with sustained slip, the heat generated by slip will be confined to a rise in the temperature of the powder in the first clutch and brake. Thus the allowable continuous slip rate for each type of machine must be determined, and the machine must be maintained within the set range during operation.
When frictional heat becomes excessive the temperature of the affected parts will rise significantly. To prevent it from happening each machine must have its particular allowable contact workload determined, and this range must be observed during operation.
¡ôNo-load torque
Even when the magnetic current is completely shut off, the residual magnetism in the powder, lubricating oil in the bearings, linings and other sources of friction can cause mechanical loss, a feature called no-load torque.
No-load torque varies from machine to machine, and if the acceleration rate becomes excessive, mechanical losses in the accelerating portion may keep the torque from reaching proper levels.
¡ôTest run
During shipment the powder in a clutch or brake may be lost or displaced, thus it is necessary to carry out test run of the parts before engaging in full use.
¡ôUnder forced-air cooling
Under forced-air cooling
Their used for compressed air cooling should be free from water and oil, and a filter system with complete oil removal should be installed to remove vapors and deliver dry, clean air. (If moist air is used with a compressed air blower it will make the machinery damp, and decrease the efficiency of the system).
If the blower system uses hoses that are long or complex, ensure that a sufficient flow of air is being delivered.
¡ôHeat blocks and heat cooling coils
Even when blowers are installed, they may lose their capacity and ability to dissipate heat, causing a drop in the operating efficiency of machines. A generous amount of space should be reserved around blower fans, especially in more adverse environments. The blades of blower fans can pick up impurities from the air and should be thoroughly cleaned on a regular basis.
A heat sensor should be fitted to the outside of the unit with a thermostatic switch and a warning system, which must be regularly checked.
¡ôOptions
Rated torque levels should not be exceeded even if they lie within the range of acceptable operating efficiencies.
When the tension control range is too broad, several different clutches may be installed and used interchangeably. In such cases the clutches must be isolated from each other to ensure that clutches that are not engaged will not run freely.
¡ôAbnormal torque on start-up
Some types of operation (*) may cause torque levels to exceed specifications during start-up (this will not adversely affect normal operations unless the powder in the units is damp). This possibility can be minimized by carrying out a proper test run on installation and applying low levels of magnetism even when the system is stopped.(* applying input after or at the same time the unit is magnetized.)
5
Key type Air Expanding Shaft
Key type Air Expanding Shaft
Purpose
It is applicable to winding and unwinding shaft of the related machine in coating, cutting, compounding, paper making, bag making, plastic items, and it can improve the working efficiency effectively.Structual features
The main body of the shaft utilize the hard chromium plating sreel pipe; it has alumium sharps with flexible scalability; deploying high quality rubber bladder and rapid aerating and exhausting gas nozzle with good sealing effect and long service life; it has removable shaft with simple maintenance.
Delivery guide
Users should specify type, dimension, the position of gas nozzle, and the tolerance of the important size of the top of shaft. All formal drawing of overall dimension should be provided. After the confirmation of both sides, we will start production.
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
CONTACT US
ADDRESS
Sunrise Group (Dongguan) Industrial Co., Ltd
Add: 5th floor, cannes international building, gangkou road, nancheng district, dongguan city, guangdong province, china. 523000
Sunrise Group (Hk) Industrial Co., Ltd
Add: RM03, 24/F, Ho King Comm CTR, 2-16 Fayuen ST, Mongkok Kowloon, Hong Hong